Dripline

Drip irrigation!

Drip irrigation is a method by which you get a saving of water because it provides the exact amount of water through drip directly to the root of the plant.
This type of irrigation saves energy and water because it feeds the roots of each plant with the right amount of water, while also achieving in this way a lower evaporation. Our Dripline can easily be used to irrigate any crop, including greenhouses, vegetables, flowers etc.

Our many years of experience in the construction of Dripline and compliance with strict Standards of production, guarantee the high quality of our products.

To the production of our Dripline, we use two type of emitter: Storm-PC and Sandguard.

Storm-PC

image

Pressure compensating

The Storm-PC emitter is a pressure compensating emitter developed for agricultural applications. The self regulation ensures the same flow rate over a range of pressures making it the ideal choice for sloped conditions or when extra long laterals are used. It has a self cleaning silicone diaphragm which ensures the compensation is not interrupted by suspended solids in the water.

 

Elevated dual filter

Storm-PC has an elevated filter which has several benefits. The elevated filter draws from water that is closer to the center of the pipe where water is traveling at high velocity. The higher velocity helps keep the filter surface clean. Also the elevation of the filter entrance inhibits solids from settling on it between flow cycles, regardless of dripper orientation in the pipe.

 

Quality

The Storm-PC is injection molded with 100% premium virgin polyethylene and additives for resistance to UV degradation and damage caused from commonly used chemicals and fertilizers.

 

Storm PC Availability
 
Flow Rates Available
Dripper Size 1.5 LPH 2 LPH 4 LPH
∅16mm X X X
∅17/18mm   X X
∅20mm   X X

Sandguard

image

Low flow

The Sandguard emitter is specially developed for well water agriculture applications where there is a high degree of suspended solids. It employs a large flowpath cross-section, a long labyrinth, and an elevated filter, which combine to create an agricultural dripper with excellent clogging resistance.

 

Long labyrinth

Sandguard has a long labyrinth with a large cross-sectional area. The long flowpath ensures a gradual drop in pressure over the entire emitter. It also ensures that gradual and unavoidable sedimentation on the labyrinth surface will not clog the emitter.

 

Elevated filter

Sandguard has an elevated filter which has several benefits. The elevated filter draws from water that is closer to the center of the pipe where water is traveling at high velocity. The higher velocity helps keep the filter surface clean. Also the elevation of the filter entrance inhibits solids from settling on it between flow cycles, regardless of dripper orientation in the pipe.

 

Quality

The Sandguard dripper is injection molded with 100% premium virgin polyethylene and additives for resistance to UV degradation and damage caused from commonly used chemicals and fertilizers.

 

Sandguard Availability
 
Flow Rates Available
Dripper Size 2 LPH 4 LPH
∅16mm X X
∅20mm X X